Centrix SA1DK Manuel d'instructions télécharger pdf (Page 4)

The following are some of the SA1DP key features :

 •Built-inProximityCardReader(125KHzASKModulation)

 •Built-inKeypadforPINcodeentry

 •InternalBuzzer

 •Comeswithsecurityscrewandsecurityscrewtool

 •TwoStatus/ProgrammingInterfaceLEDs

 •ThreeUserLevels(NormalUser,Secureuser,MasterUser)

 •ThreeModesofOperation(NormalMode,BypassMode,SecureMode)

 •”CodeSearch”featuresimpliesmaintainingusercodes

 •InputforRequesttoExit(REX)button

 •LockStrikeElectronicRelaywithbuilt-insuppressorprotection

 •Comeswithmountingtemplateforeasierinstallation

 •Built-inCaseandBackTamper

 •Bell,Chime,Siren,andStrobefeaturesavailablewithBL-D40

 •ProgrammableSirenTime

 •ProgrammableLockStrikeReleaseTime

 •ComeswithSuppressionDiode(1N4004)

4.1 Mounting

TheSA1DPisdesignedtobeeasilymountedontoaUSGangBox.

1. Before starting, select the location to mount the SA1DP controller. This location should be at

shoulder height and on the same side as the door handle.

2.RemovetheBezelScrewfromtheSA1DP(seeFigure1).

3.ScrewtheSA1DPcontrollerontoaUSGangBoxthroughthe2MountingHolesprovided(see

gure2).

4. Pass the wires through the exit/entry holes and attach them to the controller’s terminal blocks, as

shown in the wiring diagrams. (See Figure 3 & 4 in Wiring Diagrams for wiring diagrams of

common installations).

5.Replacethecontroller’sbezel,andreplacethefactorydefaultscrewwiththesecurityscrewthat

isprovidedintheInstallationKit.AsecurityscrewtoolisalsoprovidedintheInstallationKit.

3. Key Features

4. Installation

1 2 3 4 5 6 7 8 9 ... 19 20

Pas de commentaire

Centrix SA1DK Manuel d'instructions Page 4